Yaesu FTDX10 HF/50MHz 100W SDR Transceiver
Hybrid SDR Configuration
Like the FTDX101 series, the new FTDX10 utilizes the Yaesu Hybrid SDR configuration – Narrow Band SDR and Direct Sampling SDR.
Narrow Band SDR with 3 types of Roofing Filters and Phenomenal Multi-signal receiving Characteristics
Like the FTDX101 series, the Down Conversion type receiver configuration with the first IF at 9MHz has been adopted. It makes it possible to incorporate excellent narrow bandwidth crystal roofing filters that have the desired sharp “cliff edge” shape factor. Thanks to the Narrow Band SDR with the latest circuit configuration including 500Hz, 3kHz and 12kHz roofing filters and low-noise oscillator, the RMDR (Reciprocal Mixing Dynamic Range) reaches 116dB or more, the close-in BDR (Blocking Dynamic Range) reaches 141dB or more and 3rd IMDR (third-order Intermodulation Dynamic Range) reaches 109dB or more in the 14MHz band at 2kHz separation.
250MHz HRDDS (High Resolution Direct Digital Synthesizer) affords Quiet and Clear Reception
The local circuit of the new FTDX10 uses 250MHz HRDDS method same as the FTDX101 series.
Front Panel Designed for Superior Operating Efficiency
MPVD (Multi-Purpose VFO Outer Dial), is a large multi-purpose ring around the outside of the VFO dial that enables control of Clarifier, C/S (custom selection function) and recall of memory channels.
Remote Operation with optional LAN unit (SCU-LAN10)
Remote operation of the transceiver is possible with the optional SCU-LAN10 and SCU-LAN10 Network Remote Control Software.
The features of the new Yaesu FTDX10 include:
- 15 separate band pass filters
- Effective QRM rejection with the IF DSP (IF SHIFT/WIDTH, IF NOTCH DNF, DNR, COUNTOUR) High-quality and super stable final amplifier utilizing the new push-pull MOSFET RD70HUP2 Aluminum Heat Sink with 80mm low-noise axial flow cooling fan
- High Speed Automatic Antenna Tuner with a large capacity 100-channel memory
- RF & AF Transmit Monitor
- Microphone Amplifier with Three-stage parametric Equalizer (SSB/ AM mode)
- QMB (Quick Memory Bank)
- Band Stack Function
- Optional speaker – SP-30 designed for the new FTDX10
- Optional roofing filter (300Hz) – XF-130CN available
GENERAL
| TX Frequency Range | 1.8MHz – 50MHz (Amateur bands only) 70MHz – 70.5MHz (UK Amateur bands only) |
| RX Frequency Range | 30kHz – 75MHz (operating) 1.8MHz – 29.699999MHz (Specified performance, Amateur bands only) 50MHz – 53.99999MHz (Specified performance, Amateur bands only) 70MHz – 70.499999MHz (Specified performance, UK Amateur bands only) |
| Emission Modes | A1A (CW), A3E (AM), J3E (LSB/USB), F3E (FM), F1B (RTTY), G1B (PSK) |
| Frequency Steps | 1/5/10Hz (SSB, CW), 10/100Hz (AM, FM) |
| Antenna Impedance | 50Ω, unbalanced (Antenna Tuner OFF) 16.7 – 150Ω, unbalanced (Tuner ON, 1.8MHz – 29.7MHz Amateur bands) 25 – 100Ω, unbalanced (Tuner ON, 50MHz Amateur band) |
| Operating Temperature | 0°C to +50°C |
| Frequency Stability | ±0.5ppm (after 1 minute @ 0°C to +50°C) |
| Supply Voltage | 13.8V DC ±15% |
| Power Consumption (Approx.) | RX (no signal) 2.5A RX (signal present) 3.0A TX (100W) 23A |
| Dimensions | 266 (W) x 91 (H) x 263 (D) mm |
| Weight (Approx.) | 5.9kg |
TRANSMITTER
| Power Output | 100W (CW, LSB, USB, FM, RTTY, PKT), 25W (AM) |
| Modulation Type | J3E (SSB): Balanced A3E (AM): Low-Level (Early Stage) F3E (FM): Variable Reactance |
| Maximum Deviation | ±5.0kHz / ±2.5kHz (Narrow) |
| Harmonic Radiation | Better than -50dB (1.8MHz – 29.7MHz Amateur bands) Better than -63dB (50MHz Amateur band: 100W) |
| SSB Carrier Suppression | At least 60dB below peak output |
| Undesired Sideband Suppression | At least 60dB below peak output |
| Bandwidth | 3kHz (LSB/USB), 500Hz (CW) 6kHz (AM), 16kHz (FM) |
| Audio Response (SSB) | Not more than -6dB from 300 to 2700Hz |
| Microphone Impedance | 600Ω (200 to 10kΩ) |
RECEIVER
| Circuit Type | Double Super heterodyne | ||
| Intermediate Frequencies | 1st: IF 9.005MHz 2nd: IF 24kHz |
||
| Sensitivity (TYP) | SSB/CW (BW: 2.4kHz/10dB S+N/N) 1.8MHz – 30MHz 0.16µV (IPO: AMP2) 50MHz – 54MHz 0.125µV (IPO: AMP2) 70MHz – 70.5MHz 0.16µV (IPO: AMP2) AM (BW: 6kHz/10dB S+N/N, 30% modulation @ 400Hz) 0.5MHz – 1.8MHz 7.9µV 1.8MHz – 30MHz 2µV (IPO: AMP2) 50MHz – 54MHz 1µV (IPO: AMP2) 70MHz – 70.5MHz 2µV (IPO: AMP2) FM (BW: 12kHz, 12dB SINAD, 3.5kHz DEV @ 1kHz) 28MHz – 30MHz 0.25µV (IPO: AMP2) 50MHz – 54MHz 0.2µV (IPO: AMP2) 70MHz – 70.5MHz 0.25µV (IPO: AMP2) |
||
| Selectivity | Mode |
-6dB |
-60dB |
| CW (BW=0.5kHz) |
0.5kHz or better |
0.75kHz or less |
|
| SSB (BW=2.4kHz) |
2.4kHz or better |
3.6kHz or less |
|
| AM (BW=6kHz) |
6kHz or better |
15kHz or less |
|
| FM (BW=12kHz) |
12kHz or better |
25kHz or less |
|
| IF Rejection | 70dB or better (1.8MHz – 28MHz Amateur bands) 60dB or better (50MHz Amateur bands) |
||
| Image Rejection | 70dB or better (1.8MHz – 28MHz Amateur bands) 60dB or better (50MHz – 54MHz Amateur bands) |
||
| Maximum Audio Output | 2.5W into 4Ω with 10% THD | ||
| Audio Output Impedance | 4 to 16Ω (4Ω: nominal) | ||
| Conducted Radiation | Less than 4mW | ||
Specifications are subject to change, in the interest of technical improvement, without notice or obligation and are guaranteed within the amateur bands.
Supplied Accessories
- Hand Microphone SSM-75E • DC Power Cable
Datasheet FTDX10_Catalog_EN
