Trans Instruments SENZ TDS 2 (100 ~ 10000ppm)
The Senz TDS 2 is designed for liquid testing where high concentrations of below 10,000 ppm is measured. The Senz TDS 2 is both rugged and accurate. TDS readings are converted from conductivity with the factor of 2 which is an industrial standard for water testing. All readings are temperature compensated to 25ºC, a must for concentrated liquids. The Senz TDS 2 is used to measure condensate, boiler water, swimming pool water and industrial waste control etc.
Features
- Precision
Precise display of 10 ppm over the scale of 0 to 10,000 ppm. - One-Touch Calibration
On activation, the tester calibrates the end-point automatically at prescribed standard solution. - Auto-End Point
The tester automatically senses a stable end-point reading and freezes it for recording. - Hold Function
Able to freeze display for ease of reading and recording. - Beep Function
The tester beeps at every press of the button and beeps on every completed function and end-point reading.
Technical Specifications
| Model | SENZ TDS 2 (TC9054) |
| Range | 100 to 10,000 ppm |
| Resolution | 100 ppm |
| Accuracy | ± 2% full scale |
| Calibration | Single point at 6440ppm |
| Battery Type | 4 x 1.5V button cell (Alkaline A76 or equivalent) |
| Battery Life | Approx. 100 hours |
| Automatic Shut-off | Approx. 15 minutes |
| Automatic Temperature Compensation | 0 to 50°C or 32 to 122°F |
| Operating Temperature | 0 to 50°C or 32 to 122°F |
| Packaging Dimension Size (L x W x H) | 185mm x 65mm x 25mm |
| Packaging Weight | Approx. 135gm |
| Product Dimension Size (L x W x H) | 170mm x 32mm x 15mm |
| Product Weight | Approx. 70gm |
| Document | Trans Instruments Scientific |
