Specifications
| Function | Measuring range | Best accuracy | Resolution |
| ACA | 400/1200A | ±(1.7%+5) | 0.1A |
| DCV | 6/60/600V | ±(0.7%+3) | 0.001V |
| ACV | 6/60/600V | ±(1.7%+5) | 0.001V |
| Auto Resistance | 6k/60k/600k/6MΩ | ±(1.2%+4) | 1Ω |
| Resistance | 600Ω | ±(2.2%+8) | 0.1Ω |
| Frequency | 9.999/99.99/9.999k/30kHz | ±(0.6%+4) | 0.001Hz |
| Capacitance | 100n/1000n/10μ/100μ/2000μF | ±(3.7%+5) | 0.1nF |
| Continuity | Buzzer sounds at between 0Ω and 155Ω (±145Ω) Open voltage: approx. 0.4V | ||
| Diode test | Open voltage: approx. 1.6V | ||
| Voltage detection | Buzzer sounds and “-” is shown on LCD. Input sensitivity: approx. 20V or over (50/60Hz) |
||
| Sampling rate | 5 times/sec. | ||
| Bandwidth | ACA 50/60Hz ACV 50-500Hz | ||
| Display | 6000 | ||
| Clamp diameter/Conductor size | Φ42mm/20×54mm | ||
| Battery | R03×2 | ||
| Battery life | Approx. 90 hrs. at DCV (Alkaline battery/Backlight off) | ||
| Size/Mass | H238×W95×D45mm/Approx. 290g | ||
| Safety standards | IEC61010 CAT. III 600V | ||
| Standard Accessories | Test Lead TL-23a Carrying Case C-DCL1000 |
||
Datasheet
Sanwa DCL1200R Clamp Meter
