ICOM IC-U86 Amateur Handheld UHF Transceivers
The Icom IC-U86 is a robust UHF handheld transceiver designed for reliable communication in challenging conditions. Here are some key features of the IC-U86:
Output Power and Audio:
- It boasts an impressive 7 watts of output power and delivers 1500 mW of powerful audio.
- The audio quality is significantly improved compared to its predecessor, the IC-V80.
Dust-Proof and Water-Resistant:
- The IC-U86 is rated IP54, providing protection against dust and water.
- It also complies with MIL-STD 810G standards, ensuring durability in harsh environments.
Long Battery Life:
- With the BP-298 battery, it offers up to 19 hours of continuous use.
No PC Programming Necessary:
- You can change settings directly from the radio without requiring PC programming.
Built-in Features:
- 200 memory channels, 1 call channel, and 6 scan edges.
- Integrated VOX function for hands-free communication.
- CTCSS and DTCS encoder/decoder.
- Priority, program, memory, skip, and tone scanning.
Dimensions and Weight:
Dimensions (excluding projections): 58.6 mm × 112 mm × 30.5 mm (2.3 in × 4.4 in × 1.2 in).
Weight (with BP-298 and antenna):
- 300 g (10.6 oz) with FA-B57V antenna.
- 290 g (10.2 oz) with FA-B57U antenna.
Frequency Range:
- TX: 144–148 MHz, RX: 136–174 MHz (VHF).
- TX: 430–450 MHz, RX: 400–472 MHz (UHF).
Whether you’re an amateur radio enthusiast or need a reliable communication tool for outdoor adventures, the Icom IC-U86 has you covered!
Specifications
General
| IC-V86 | IC-U86 | ||
|---|---|---|---|
| Frequency range (TX/RX guaranteed range) |
136–174 MHz |
EXP1: 400–472 MHz |
|
| Type of emissions |
F2D, F3E (FM, FM-N) |
||
| Number of channels |
207 channels (200 memory channels, 1 call channel and 6 scan edges) |
||
| Antenna impedance |
50Ω |
||
| Power supply requirement |
7.5V DC |
||
| Operating temperature range |
–20 ˚C to +60 ˚C, –4 °F to +140 °F |
||
| Frequency stability |
±2.5ppm (–20 ˚C to +60 ˚C, –4 °F to +140 °F) |
||
| Current drain (For the transceiver with a “U” mark on the serial number label) |
TX (EX Hi/Hi/Mid/Low) |
1.4/1.0/0.5 A typical | EXP1: 1.5/1.0/0.5 A typ. EXP2: 1.4/0.9/0.5 A typ. |
| RX (Max. audio) |
450 mA typ. (INT SP), |
450 mA typ. (INT SP), |
|
| Dimensions (W×H×D) (Projections not included) |
58.6 × 112 × 30.5 mm, 2.3 × 4.4 × 1.2 in (with BP-298) |
||
| Weight (Approximate) |
300 g, 10.6 oz |
290 g, 10.2 oz |
|
| IC-V86 | IC-U86 | |
|---|---|---|
| Output power (Hi/Hi/Mid/Low) |
5.0/2.5/0.5 W |
5.0/2.0/0.5 W |
| Maximum frequency deviation |
±5.0 kHz/±2.5 kHz (Wide/Narrow) |
|
| Spurious emissions |
Less than –60 dB |
|
| External microphone connector |
3-conductor 2.5 (d) mm (1/10″)/2.2 kΩ |
|
| IC-V86 | IC-U86 | ||
|---|---|---|---|
| Sensitivity |
–124 dBm typical |
EXP1: –121 dBm typical |
|
| Squelch sensitivity |
–126 dBm typical |
EXP1: –123 dBm typical |
|
| Selectivity (Wide/Narrow) |
75 dB typical/ |
70 dB typical/ |
|
| Intermodulation |
65 dB typical |
||
| Audio output power (For the transceiver with a “U” mark on the serial number label) |
Internal SP |
1500 mW typical (with 8 Ω load) |
|
| External SP |
450 mW typical (single end) |
||
| External speaker connector |
3-conductor 3.5(d)mm (1/8″)/8Ω |
||
Applicable IP Rating
| Ingress Protection Standard | |
|---|---|
| Dust and Water | IP54 (Dust-protection, water resistance) |
All stated specifications are subject to change without notice or obligation
Supplied Accessories
- BP-298/BP-264, battery pack*
- BC-240, Desktop charger
- BC-242, AC adapter
- MB-124, belt clip
- Antenna*
* May differ, depending on transceiver version
Datasheet IC-V86/IC-U86 VHF and UHF Transceivers
